| Standard Features |
| Dimensions: |
Height - 318 mm
Width - 305 mm
Depth - 330 mm
Weight - 11 kg |
| Printhead: |
102 mm/812 dots
8.0 dots/mm |
| Fonts Available: |
Standard, Reduced, Bold, OCR-A-Like, CG Triumvirate, CG Triumvirate Bold
1x to 7x magnification |
| PC/Host Interface: |
- IEEE parallel (Centronics mode)
- Asynchronous RS-232C
NONE, XON/XOFF, DTR, and CTS Flow Control
1200, 2400, 4800, 9600, 19.2K, or 38400 baud
ASCII data transmission code
|
| Memory: |
1 MB RAM total: transmit, receive, image,
format, internal, downloadable font |
| Character Sets Available: |
- Monarch Internal
- ANSI
- DOS Code Page 437
- DOS Code Page 850
|
| Fonts Available: |
Standard, Reduced, Bold, OCRA-like, CG Triumvirate, CG Triumvirate
Bold |
| Magnification available for all fonts: |
1x to 7x |
| Black to White Print Ratio: |
30% black maximum per square inch |
| Supplies |
| Only Monarch® supplies are recommended; use thermal
transfer stock with ribbon or thermal direct stock. For high
density and serial bar codes, Monarch "premium" supplies are recommended. |
| Ribbon Widths: |
55 mm
105 mm
Ribbon rolls contain 600 meters of ribbonThe width of the
ribbon must be greater than the supply width. Since some supplies are more abrasive to
printheads than others, using a ribbon wider than your supply helps protect the printhead.
|
| Supply Sizes: |
Widths - 31 mm to 102 mm
Lengths - 25 mm to 305 mm |
| Performance |
| Power: |
U.S. - 115 V/60 Hz., 250 Watts nominal
International - 220 V/50 Hz |
| Printing Rate: |
152mm per second, 102mm per second or 64 mm per second |
| Environment Ranges |
| Temperature: |
Operating Thermal Transfer
4° to 35° C
Operating Thermal Direct
4° to 40° C
Storage:
-10° to 49° C |
| Humidity: |
Operating and Storage:
5% to 90% non-condensing |
| Electrostatic Discharge and Air Quality: |
Some problems with electronic equipment may occur in environments
prone to static discharge or extreme dust conditions. Monarch suggests that you take
precautions to minimize these problems. Contact your Monarch
representative for recommended precautions. |
Bar Code Symbologies Available: (back to index)
This printer also prints high-density bar codes and bar codes in the serial direction.
| Barcode Type |
Narrow to Wide Ratio |
% Density or CPI |
Nominal Width
(dots/mils) |
Data Length |
| UPCA +2/+5 |
1:1.0 |
76%, 114% |
2/9.9, 3/14.8 |
11 or 12, 14/17 |
| UPCE +2/+5 |
1:1.0 |
76%, 114% |
2/9.9, 3/14.8 |
6 or 7, 9/12 |
| EAN8 +2/+5 |
1:1.0 |
76%, 114% |
2/9.9, 3/14.8 |
7 or 8, 10/13 |
| EAN13 +2/+5 |
1:1.0 |
76%, 114% |
2/9.9, 3/14.8 |
12 or 13, 15/18 |
| Interleaved 2of5 |
1:30
1:2.5
1:2.3
1:2.0 |
1.1, 3.2, 5.6, 7.5, 11.0, 11.2
2.1, 4.2, 6.3, 12.7
8.8, 9.6, 14.5 |
21/103.4, 7/34.5, 4/19.7,
3/14.8, 2/9.9, 12/59.1, 6/29.6, 4/19.7, 2/9.9
3/14.8
3/14.8, 2/9.9 |
0 to 2710 |
| Extended Code39 |
1:30
1:2.5
1:2.2
1:2.0 |
4.2, 6.3, 12.7*
1.4, 1.7, 3.5, 7.0
3.0
3.9 |
3/14.8, 2/9.9, 1/4.9
10/49.3, 8/39.4, 4/19.7, 2/9.9
5/24.6, 4/19.7 |
0 to 2710 |
| Codabar (NW7) |
1:3.0
1:2.5
1:2.0 |
2.1, 8.4
3.0, 4.6, 9.2
5.1
10.1 |
8/39.4, 2/9.9
6/29.6, 4/19.7, 2/9.9
4/19.7, 2/9.9 |
0 to 2710 |
| Code 128 |
1:1.0 |
3.7/7.4, 4.6/9.2, 6.1/12.3, 9.2/18.4 |
5/24.6, 4/19.7, 3/14.8, 2/9.9 |
0 to 2710 |
| Code 93 |
N/A |
3.7
4.5
5.6
7.5
11.2 |
6/29.6
5/24.6
4/19.7
3/14.8
2/9.9 |
0 to 2710 |
| MSI |
1:2.5
1:2.0 |
7.2
|
4.2, 5.6, 2/9.9
4/19.7, 3/14.8 |
0 to 2710 |
| * Parallel only for special application. |
(back to
index)
In our ongoing effort to deliver the
best technology, specifications are subject to change without notice.
|
